News and Updates
6 Factors to Consider when Selecting your Metering/ Dosing pumps

Metering pumps are designed to move a controlled volume of fluid within a specified period. This process is known as metering or dosing, hence the name metering or dosing pump. These pumps are used to distribute liquids, such as chemicals and solutions. Some common industrial uses for these are water treatment plants, chemical processing plants, and many different agricultural applications. The selection of the right dosing pump for the proper application is of paramount importance in every industry. Due to variations and various chemical pumps available, selecting the correct chemical metering pump can be tedious.

Below are 6 factors to consider when selecting the right pump for the best application:

 

Flow Rate

Knowing your expected or desired flow rate is crucial in choosing the proper dosing pump for your application. The desired flow rate is measured in gallons per minute (GPM) or liter per hour (LPH). A good rule of thumb is to ensure that your maximum expected flow rate is equal to 90% of the pump’s capacity. This way, you will give room for a small increase in the flow rate if needed.

 

Pressure

Another factor you should consider when selecting your pump is the pressure conditions on your pump’s inlet and outlet. This information will help you to choose the right dosing pump.

 

Temperature

How hot will the fluid you are pumping be? The answer to this question will affect which pump materials are best suited for your application.

 

Viscosity

To select the right pump, you need to know the viscosity of the fluid to be pumped. High viscosity fluids require more robust pumping equipment.

 

Liquid end material:  A key factor to consider when choosing a metering pump for an application is the nature of the chemical to be dosed. This will dictate the suitable liquid end material for the metering pump.

Operating Environment

Another essential factor you need to keep in mind is the operating environment, which is usually overlooked, but it has a significant impact on the pump’s performance. If the pump is operating in a cold temperature environment, you must make sure that the fluid that is being pumped will not freeze at that specific temperature.

 

It is also essential to consult an expert when choosing the right dosing pump for your application. At Bell Oil & Gas ( BOG), we have a team of experts that will help you select the best dosing pumps. We offer the best in class Milton Roy (MR) dosing pumps that deliver unsurpassed reliability and accuracy in critical chemical dosing applications. Milton Roy has a wide range of products to cover all industrial needs.

 

Bell Oil & Gas also owns the first Milton Roy Authorized Service Centre (ASC) in Africa. The service centre provides in-country aftermarket support to clients across the oil and gas and general industries in Nigeria and technical support to the doorsteps of Milton Roy customers in Africa. As an Authorized Service Centre, BOG has exclusive access to MR’s technical materials and full authorization to perform repairs, maintenance, and services on behalf of MR. This authorization also covers installations, audits, health checks and annual contracts. All spares and equipment purchased and/or commissioned at the Authorized Service Centre have a warranty.

 

For more enquiries,  please contact enquiries@belloil.com, ofadoyeni@belloil.com, dadedapo@belloil.com 

 

See Milton Roy Product range below

LMI Series

G Series

 MAXROYAL Series

MILROYAL Series 


All Updates


GRE Repair on ERHA FPSO
Posted on Monday, October 19, 2020


GRE Repair on USAN FPSO
Posted on


Filter Spools Fabrication for Total E&P
Posted on


8000 Hours Service of 4units of Ingersoll Rand Rs30i Compressors
Posted on Sunday, October 18, 2020


Commissioning of Sundyne Pump at NLNG
Posted on


The Secrets of Milton Roy’s Success in Africa
Posted on


NCDMB’s Executive Secretary Speech at BOG’s Groundbreaking Ceremony
Posted on


NNRA Inspection in BOG Port Harcourt
Posted on


OMB Cryogenic Valves
Posted on Sunday, September 27, 2020


NOV Spoolable Line Pipes
Posted on


6 Factors to Consider when Selecting your Metering/ Dosing pumps
Posted on Sunday, September 13, 2020


Benefits of Sundyne Marelli Pumps
Posted on Friday, August 21, 2020


Kayode Thomas’ Interview with BBC Africa
Posted on Friday, August 7, 2020


BOG Awards Construction Contract for Multimillion Dollar Pipe Threading and Valve Assembly Plants
Posted on Saturday, July 18, 2020


SON Issues IMS Certificate To BOG
Posted on


BOG-Expro Well Testing Campaign
Posted on


Technical Assistance Service
Posted on


Overhaul of Sundyne Pump at NLNG
Posted on


Focus on Sundyne
Posted on


The Benefits of the First Milton Roy Authorized Service Centre in Africa
Posted on


COVID-19 and The Workplace: Quality Health Safety and Environment (QHSE) Strategies at Bell Oil &Gas
Posted on


The Petroleum Industry Bill (PIB)
Posted on


CEO’s Message on Worker’s Day
Posted on Friday, May 1, 2020


FOCUS OF MILTON ROY
Posted on Saturday, April 11, 2020


Sundyne and BOG on Sales Visits
Posted on


Offshore/Onshore Hose Assembly Services for Total E&P
Posted on


Collaboration with Expro on Asasa Field
Posted on


BOG Embarks on Exxon Mobil-Usan Shutdown Project
Posted on


BOG Achieves Integrated Management System (IMS) Certification
Posted on Friday, April 10, 2020


SON-MSC Organizes Stakeholders’ Forum
Posted on